ZAA2600 - Manual
9 Scratch and mar resistance tests
9.1 Preparation
To carry out scratch and mar resistance tests, at least one scratching set is needed. Some
standards or test procedures require additional equipment and auxiliary material.
For available options for scratch and mar resistance tests please refer to chapter 3.2.4
"Accessories for ZAA2600.C for scratch and mar resistance tests" on page 18.
9.2 Mounting the scratching and mar resistance sets
For further information on operation please refer to the instruction manual of the ZHT 2093.
Loosen the head by turning it anti-clockwise.
Remove the spring.
Choose the required spring (See separate manual.)
Insert the plastic pin delivered with the adapter into the spring on the side of the marking.
Insert the spring with the pin ahead into the grip.
23. September 2021
© Copyright 2021, PROCEQ SA
54