ZAA2600 - Manual
Insert the grip into the black telescope bar of the adapter (ACC1287).
Screw the head onto the grip and fasten it.
Turn the head clockwise until the wheels point in the direction of movement in relation to
the grip.
9.3 Carry out scratch and mar resistance tests
Never touch any moving parts during operation.
The side panels (15) must always be mounted during operation.
Risk of injury: Never hold the sample by hand during operation. It has to be fixed with
an appropriate means, e.g. double sided adhesive tape.
Scratch tests are carried out in machine mode „Applicator" in moving mode „Single".
Go to the menu on the touchscreen -> select Setup, set the machine mode to
„Applicator", visible through an arrow
23. September 2021
on the touchscreen.
© Copyright 2021, PROCEQ SA
55