Table of Contents
Advertisement
IP/UDP Relay
The Express XL/XLT can be configured as a relay agent for UDP broadcast
packets. Normally, a router will not forward UDP broadcast packets. How-
ever, many network application use UDP broadcasts to configure addresses,
host names, and other information. If hosts using these protocols are not on the
same network segment as the servers providing the information, the client
programs will not receive a response without enabling the UDP relay agent.
UDP Relay/Mode
Write security: 3; Read security: 5
When this option is set to On (def), the Express XL/XLT will act as a relay
agent.
UDP Relay/UDP Relay List
Up to four relay destination servers can be specified in this list.
UDP Relay List/Relay Address
Write security: 3; Read security: 5
This is the IP address of the server that will receive the relay packet.
UDP Relay List/UDP Port Type
Write security: 3; Read security: 5
Standard (def) - The following standard UDP protocols are
relayed when set: DHCP, TFTP, DNS, NTP (Network
Time Protocol, port 123). NBNS (NetBIOS Name Server, port 137),
NBDG (NetBIOS Datagram, port 138), and BootP.
Specified - When set, the UDP port (1 to 65535) can be specified in
the UDP Port columns. (up to a maximum of three per server)
UDP Relay List/UDP Port 1, UDP Port 2, UDP Port 3
Write security: 3; Read security: 5
UDP Port 1, UDP Port 2, and UDP Port 3 are used for specifying UDP ports to
be relayed. These fields only apply when UDP Port Type is set to Specified.
61200.070L1-1
Chapter 3: Terminal Menu Operation and Structure
Express XL/XLT User Manual
45
Advertisement
Table of Contents
Troubleshooting
