Standardized Error Codes - Precor TRM10/GEN06 Service Manual

Standardized Error Codes

The system generates error codes and stores those codes in a block of
memory known as the ERROR LOG. The error is entered into the error log
when it detects conditions that are defined in the error reporting
software.
The error log displays the 10 most resent errors, with error location one
being the most recent. Not all system issues will generate an error code,
only the errors that can be generated in the treadmill will be described
in this section. The error codes are useful in isolating certain system
issues.
To view errors in the error log, press and hold the reset key for at
least 6 seconds. If there are errors logged, this action will take you
into the error log. The error log can also be accessed through the
Information Display by pressing either STOP, PAUSE, or RESET, then the
numbers 6, 5.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 36