General Information; Orientation; Tools; Parts - Precor GEN06 Series C952 Service Manual

General Information

The following information provides general equipment and service information that will help
you to use this manual to properly repair and maintain the treadmill.

Orientation

The equipment orientation (front, right, left, back) used in manual is referenced to a user stand-
ing on the equipment facing the console.

Tools

General set of service and repair tools.
US and Metric Hex Key set
l
US SAE and Metric Wrench set
l
Torque wrench
l
US SAE and Metric socket set
l
Running belt tension gauge
l
(pn PPP00000002000710

Parts

IMPORTANT: Always purchase OEM replacement parts and hardware from Precor.
If you use parts not approved by Precor, you could void the Precor Limited Warranty.
Use of parts not approved by Precor may cause injury.
Exploded View Diagram and Parts List
There is a copy of the parts Exploded View Diagram and Parts Identification List included in
the "Parts" on page 111
you go to the servicer partners
(Undefined variable: TRM700-16Base.ServiceManualTitle)
Standard and Philips screw driver set
l
DVM Multimeter
l
Crank Puller (recommended Park Tool CCP-22)
l
Belt Tension Gauge (recommended Kent-Moore BT-33-73-
l
F)
chapter that you can use as a quick reference. It is recommended that
Precor Connect (or Precor Connection) website to view the
1 Introduction
General Information
3