General Parameter Information - Festo CPX-CEC Series Manual

"General" tab
Figure: Target settings "General" tab
1. "Load bootproject automatically" function
Note
The boot project in the controller can be overwritten automatically.
•
Deactivate the "Load bootproject automatically" function if necessary.
2. "No address check" function
Note
The "No address check" option in the "Target Settings" dialog relates to the check of I/O
addresses used in the PLC code. CoDeSys can determine whether a PLC program references an
incorrect address.
In contrast, the "Check for overlapping addresses" option ensures that the address ranges of
individual modules in the PLC configuration are not exceeded, which can be extremely useful
when defining the module addresses manually.
The CoDeSys general online Help contains information on all other settings for the target system.
1.5.3

General parameter information

The representation and options for setting CPX module parameters vary depending on the
connection mode:
Offline: parameters can be set
–
Online: active parameters are displayed
–
The modified parameters are transferred to the CPX system and activated as soon as an online
connection is established.
Modular valve terminal with integrated controller CPX-CEC-...
25