Table of Contents
Advertisement
2. Safety instructions for electrical drives and controllers
2.4
Safety instructions
2.4.1
General safety information
14
Warning
DANGER !
High electric voltage due to incorrect connection!
Danger of death or bodily injury due to electric shock!
Warning
DANGER !
Surfaces of the device housing may be hot!
Danger of injury Danger of burns!
Warning
DANGER !
Dangerous movements!
Danger of death, serious bodily injury or damage to property due to
unintentional movement of the motors!
Warning
The motor controller corresponds to protection class IP20 as well
as degree of contamination 2.
Care must be taken that the surroundings correspond to this
protection and contamination class (see chapter 5.1)
Warning
Use only accessories and spare parts which are approved of by
the manufacturer.
Warning
The motor controllers must be connected to the mains network
in accordance with EN standards and VDE/appropriate national
regulations, so that they can be disconnected with suitable un-
coupling devices (e.g. main switch, fuse, circuit breaker).
Warning
For switching the control contacts, gold contacts or contacts with
high contact pressure should be used.
Festo P.BE-CMMS-AS-HW-EN en 0708NH
Hide quick links:
Advertisement
Table of Contents
