Installing The Target System - Festo CPX-CEC Series Manual

1.4.3

Installing the target system

If the software package "CoDeSys V2.3 provided by Festo" has already been installed and operated with
other controllers, the Target Support Package (TSP) for the new target system may have to be installed.
The Target Support Package contains information on the controllers (target system) required by "CoDeSys
V2.3 provided by Festo".
Depending on the controller you will require the following Target Support Package:
"Festo CPX-CEC / CPX-CEC-C1".
–
"Festo CPX-CEC-M1".
–
The Target Support Package is often provided as a ZIP file. The file must be unpacked prior to
installation.
•
Use a temporary folder to do this.
•
Make sure that the structure of the folders in the ZIP file remains the same.
•
Install the Target Support Package using the program "InstallTarget".
This program is located in the Start menu under Programs\Festo Software\CoDeSys V2.3 by Festo.
Figure: Adding Target Support Packages using "InstallTarget"
Packages that have already been installed are displayed under "Possible Targets".
Note
The old version must be uninstalled before the new version for an existing TSP can be installed.
•
Remove the old version using the "InstallTarget" program.
•
Delete the directory of the old TSP from your file system.
•
Click the "Open" button to select the Target Support Package.
Modular valve terminal with integrated controller CPX-CEC-...
17