Assembly; General Information On Assembly And Disassembly - Festo CECX-K-D1 Electronic Manual

2. Assembly

2. Assembly

2.1 General information on assembly and disassembly

24
Caution
Inappropriate handling can result in damage to the modules and
the control system.
Switch off the operating and load voltage supplies before carry-
ing out assembly, installation and maintenance work.
Note
Damage to components.
Handle all modules and components with great care.
Please note the following in particular:
- Contact surfaces must be clean (avoid contact faults).
- The bus plug contacts must not be bent.
- Make sure that no wire pieces, fillings or chips fall into the de-
vice if you are drilling holes or joining wires.
Festo GDCC-CECX-K-D1-EN en 0802a