Safety Instructions; General Safety Information - Festo CMMP Series Description

2. Safety instructions for electric drives and controllers
2.4

Safety instructions

2.4.1

General safety information

Festo P.BE-CMMS-FHPP-PB-SW-EN en 0708NH
Warning
The motor controller complies with protection class IP20.
Warning
Use only accessories and spare parts which are approved of by the
manufacturer.
Warning
The motor controllers must be connected to the mains network in
accordance with EN standards and appropriate national regula-
tions, so that they can be disconnected with suitable uncoupling
devices (e.g. main switch, fuse, circuit breaker).
The motor controller can be fused with a 300 mA all-current sensi-
tive FI protective switch (RCD = Residual Current protective Device).
Warning
For switching the control contacts you should use gold-plated
contacts or high-pressure contacts.
Precautionary measures must be taken for preventing interference
to switching systems, e.g. switching protective switches and relays
with RC elements or diodes.
You must observe the safety regulations and directives of the
country in which the device is to be used.
Warning
The environmental conditions specified in the product
documentation must be observed.
Safety-critical applications are not permitted if they are not
explicitly approved of by the manufacturer.
11