Festo CPX-CEC Series Manual page 31

Configuring CANopen masters (CPX-CEC-C1 and CPX-CEC-M1 only)
A CANopen module is added to the PLC configuration as follows:
•
Open the context menu in the left half of the "PLC Configuration" window with the right mouse button.
Figure: Adding a CANopen module
•
Click on the "Append Subelement" command and then "CANopen-Master..." to add the CANopen
master.
Figure: PLC configuration with CANopen module
Modular valve terminal with integrated controller CPX-CEC-...
29