Libraries - Festo CPX-CEC Series Manual

CPX-CEC-...
1.3.2

Libraries

CoDeSys provided by Festo offers the following libraries for the Festo CoDeSys controller.
Library
Standard.lib
Util.lib
AnalyzationNew.lib
IecSfc.lib
3S_CanDrv.lib
3S_CANopenManager.lib
3S_CANopenMaster.lib
BusDiag.lib
1)
SysLibCallback.lib
SysLibCom.lib
SysLibDir.lib
SysLibEvent.lib
SysLibFile.lib
SysLibFileAsync.lib
SysLibFileStream.lib
SysLibGetAddress.lib
SysLibIecTasks.lib
SysLibMem.lib
SysLibPLCConfig.lib
SysLibProjectInfo.lib
2)
SysLibRtc.lib
SysLibSem.lib
3)
SysLibSockets.lib
3)
SysLibSocketsAsync.lib
SysLibStr.lib
SysLibSymbols.lib
SysLibTask.lib
SysLibTime.lib
SysLibVisu.lib
SysTaskInfo.lib
NetVarUdp_LIB_V23.lib
4)
ModbusTCPSrv.lib
14
Description
Modules that the IEC61131-3 requires as standard
modules for an IEC programming system.
Modules for BCD conversion, bit/byte functions,
mathematical help functions, controllers, signal
generators, function manipulators and analogue value
processing.
Modules for analysing expressions.
ActionControl
Only for internal use in combination with the CANopen
master.
Diagnosis for CANopen bus systems.
System libraries that provide access to the special
hardware and software functions of the Festo
CoDeSys controller (e.g. access to real-time clock, file
system, communication interfaces, etc.).
System libraries other than those listed are not
approved for the CPX-CEC-....
Modules for communicating via Modbus TCP.
Source
3S
Standard
–
libraries for
CoDeSys
3S
CANopen
–
libraries
3S
Target
–
system-
specific
libraries that
are specially
adapted to the
CPX-CEC-....
3S (additional
libraries)
Modbus
–
libraries for
CoDeSys