1.2.4
Designated use
With CoDeSys provided by Festo, the user who is familiar with the component connected to the PC can
undertake the configuration, commissioning and programming of the supported controllers.
Observe the standards specified in the relevant sections, as well as national and local laws and technical
regulations.
1.2.5
Service
Please contact your local Festo Service partner if you have any technical problems
(see http://www.festo.com).
1.2.6
Target group
This manual is intended exclusively for technicians trained in control and automation technology who have
experience in installing and commissioning programmable logic controllers.
1.2.7
Important user information
Danger categories
This document contains information on possible dangers that can occur if the product is not used as
designated. These danger warnings are marked with a signal word (warning, caution, etc.), placed on a
grey background and additionally marked with a pictogram. A distinction is made between the following
danger warnings:
Warning
... means that serious injury to people and damage to property can occur if this warning is not
heeded.
Caution
... means that injury to people and damage to property can occur if this warning is not heeded.
Note
... means that damage to property can occur if this warning is not heeded.
You can find details on how special information is represented under "Marking special information".
1.2.8
Marking special information in the target system-specific Help
You can find information on how danger warnings are represented under "Important user information".
Pictograms
The following pictograms mark passages in the text that contain special information.
Information: Recommendations, tips and references to other sources of information.
Accessory: Information on necessary or useful accessories for the Festo product.
Environment: Information on the environmentally friendly use of Festo products.
Text markings
1.
Figures denote activities that must be carried out in the order specified.
•
Bullets denote activities that may be carried out in any desired order.
Hyphens denote general listings.
–
Modular valve terminal with integrated controller CPX-CEC-...
3