Festo CPX-CEC Series Manual page 20

CPX-CEC-...
Figure: Opening the Target Support Package
•
Select the file "CPX-CEC.tnf", for example, from the temporary folder that you created when
unpacking the ZIP file. Then click "Open".
The Target Support Package is added on the left side under "Possible Targets".
Figure: Possible and installed target systems
•
Enter the path of the directory where you wish to install the Target Support Package under "Installation
directory". You can also change the installation directory using the "..." button.
•
Highlight the target system to be installed on the left and click the "Install" button.
If the installation directory specified is not available, the following message asks whether you wish to
create the directory.
•
If so, click "Yes" to confirm.
The new Target Support Package should then appear on the right under "Installed Targets".
18