Safety Instructions; General Safety Information - Festo CMMS-ST-C8-7 Mounting And Installation

2. Safety instructions for electrical drives and control systems

2.4 Safety instructions

2.4.1 General safety information

14
Warning
DANGER!
High voltage due to incorrect connection!
Risk of fatality or injury from electric shock!
Warning
DANGER!
Surfaces on the device housing can become hot!
Danger of injury! Danger of burning!
Warning
DANGER!
Hazardous motions!
Risk of fatality, serious injury or material damage due to
unintentional motion of the motors!
Warning
The stepping motor controller conforms to protection class IP20,
and contamination class 1.
You must ensure that the surrounding area complies with these
protection and contamination classes.
Warning
Use accessories and spare parts approved by the manufacturer
only.
Warning
In accordance with the EN standards and the VDE regulations,
the stepping motor controllers must be connected to the grid
such that they can be disconnected using appropriate isolating
equipment (e.g. main switch, contactor, circuit breaker).
Warning
Gold-plated contacts or contacts with high contact pressure should
be used to switch the control contacts.
Festo P.BE-CMMS-ST-HW-EN 0708NH