CPX-CEC-...
1.4.4
Selecting the target system
A new project must be created before a target system can be selected.
•
Select the [File] [New] menu command. The "Target Settings" window is then opened.
Figure: New project
•
Select the relevant entry to configure projects on the Festo CoDeSys controller.
•
Click "OK" to confirm this target system setting.
The next window opens automatically so that you can create a new programming module.
Figure: Creating a programming module
•
Select the program type from the "Type of POU" field.
•
Select a programming language ("ST" for "Structured Text" in this example) from the "Language of the
POU" field.
•
Click "OK" to close the window.
20