CPX-CEC-...
1.4
Preliminary work
1.4.1
Prerequisites
Hardware
CPX-CEC-... with active CoDeSys run-time system
–
Ethernet network components
–
PC (Windows 2000 or higher) with Ethernet interface
–
Software
CoDeSys V2.3 provided by Festo
–
Target Support Package: Festo CPX-CEC-... compatible with firmware
–
Important documentation for controller hardware and software
Filename
CPX-CEC_en.pdf
CoDeSys_V23_E.pdf
CoDeSys_Visu_V23_E.pdf
OPC_20_how_to_use_E.pdf
Table: List of important user documentation
After installing CoDeSys pb Festo, you will find further documentation in the program directory of
CoDeSys provided by Festo on your PC:
...\CoDeSys V2.3\Documents
...\CoDeSys V2.3\Targets\Festo\"Controller"\Help
Subfolders contain the documents in different languages.
1.4.2
Preparing the PC
The following software package is required to use CoDeSys pb Festo for CPX-CEC-...:
CoDeSys V2.3 provided by Festo with TSP for CPX-CEC-...
•
Alternatively, use:
the CD-ROM provided,
–
the installation package downloaded from the Internet (see http://www.festo.com/download).
–
Install the software packages on your PC if a previous version of these packages is installed or if no
packages are installed at all. Information on installation and system requirements for the software
packages is included in the relevant user documentation.
16
Contents
Manual for Festo controller (English)
Manual for CoDeSys programming system (English)
Manual for CoDeSys visualisation (English)
Documentation for OPC server V2.0, installation and use
(English)