Roof Assembly - KidKraft WINDALE Installation And Operating Instructions Manual

Step 6: Roof Assembly
Part 1
A: Attach 1 (1424) Roof Support to another at the peak using 1 (S4) #8 x 3" Wood Screw. Do this twice so you
have 2 Roof Support Assemblies. (fig. 6.1)
B: Attach 1 (1425) Roof Joist to another at the peak using 1 (S4) #8 x 3" Wood Screw. (fig. 6.1)
C: Place the Roof Supports and Joist Assemblies in the pattern shown in fig. 6.1. Once in the pattern check that
the assemblies have the same angles.
Fig. 6.1
1424
Wood Parts
2 x Roof Joist 2 x 2 x 38-3/4"
1425
4 x Roof Support 2 x 3 x 40"
1424
S4
1424
S4
1425
Hardware
3 x #8 x 3" Wood Screw
S4
21
1425
S4
1424