Test Modes; Printing A List Of The Currently Selected Conditions - GRAPHTEC FC4200-50 Service Manual

8. TEST MODES

8.1 Printing a List of the Currently Selected Conditions

Caution:
As soon as the F2 (COND. PAT.) key is pressed to select this function in Step (4) below, the pen carriage
begins moving. Be sure to keep hands, hair, and so forth away from the plotterʼs moving parts.
The PRINT CONDITION function prints a list of the plotterʼs currently selected conditions so you can
check them all at once.
Setting Procedure
1. Load a medium of A4 size or larger in the plotter.
2. Press the PAUSE key, then press the
3. Press the (OPTION2) key to display the menu below.
F4
4. When the (COND. PAT.) key is pressed, the menu below appears and the plotter begins printing a
F2
list of its currently selected conditions.
5. After the conditions have been printed, the plotter resumes READY status.
FC4200-UM-251-03-9370
NEXT PAGE key until the menu below appears.
FORCE
F1
OPTION1
F2
SPEED
FORCE
F1
COND. PAT.
F2
SPEED
FORCE
F1
PRINT CONDITION
F2
SPEED
OFFSET
OPTION2
QUALITY
OFFSET
SELF TEST
DUMP
QUALITY
OFFSET
QUALITY
52
TEST MODES
F3
F4
F3
F4
F3
F4