Inputting The Data From A Personal Computer - Mitsubishi Electric M800W Series Connection And Set Up Manual

M800W/M80W Series Connection and Setup Manual
31 Setting the Handy Terminal
It is necessary to customize the display part composition, the key input, the communication condition with NC, etc. to
connect the handy terminal (HG1T-SB12UH-MK1346-L*).
Create the customized data with "NC Designer HT" and download it to the handy terminal.
There are two methods to input customized data for the handy terminal.
(1) Connecting a personal computer and the handy terminal and inputting the data from "NC Designer HT"
(2) Connecting NC and the handy terminal and inputting the data from a SD card

31.1 Inputting the Data from a Personal Computer

Create a project data (*.p1t), which is handled as customized data, with the customized data creation tool "NC Designer
HT". Then download it to the handy terminal.
(1) Start the customized data creation tool "NC Designer HT" to create the project data (*.p1t).
(2) Connect a personal computer and the handy terminal via serial RS-232C.
IB-1501268-K 556