Setting The Dip Switch - Mitsubishi Electric M800W Series Connection And Set Up Manual

M800W/M80W Series Connection and Setup Manual
20 Setting the Hardware
MDS-EJ-V2/SP2 setting
(Note 1) As for 2-axis drive unit, one rotary switch sets the L and M axes to the consecutive axis Nos.
(Note 2) As for 2-axis drive unit, the rotary switch setting "F" is prohibited.

20.3.2 Setting the DIP Switch

As a standard setting, turn the all DIP switches OFF.
MDS-EJ/EJH-V1, MDS-EJ-SP setting
MDS-EJ-V2/SP2 setting
CAUTION
An axis set unused is not included in the functional safety.
IB-1501268-K
Rotary switch setting
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
The switches are OFF when facing bottom as illustrated.
Setting unused axis
The switches are OFF when facing bottom as illustrated.
M axis Setting unused axis
L axis Setting unused axis
416
AXIS NO.
L axis M axis
1st axis 2nd axis
2nd axis 3rd axis
3rd axis 4th axis
4th axis 5th axis
5th axis 6th axis
6th axis 7th axis
7th axis 8th axis
8th axis 9th axis
9th axis 10th axis
10th axis 11th axis
11th axis 12th axis
12th axis 13th axis
13th axis 14th axis
14th axis 15th axis
15th axis 16th axis
Setting prohibited
Unused axis can be set by turning the switches ON.
Unused axis can be set by turning the switches ON.
When there is unused axis for the 2-axis drive unit,
set unused axis.