Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
6 Precautions for Connecting
(b) For a flat cable type connector with latches, open the latches in the directions of the arrows, and pull the connector
off.
(2)
Pull
(c)
For a flat cable type connector without latches, hold the connector with a thumb and forefinger, and pull the
connector off.
(2)
Pull
(d) For the screw fixed type connector, loosen the two fixing screws, and pull the connector off.
(2)
Pull
CAUTION
1. Do not connect or disconnect the cables between units while the power is ON.
2. Do not pull the cables when connecting/disconnecting it.
(1)
Open
(1)
Hold with thumb and forefinger.
(1)
Loosen
(1)
(2)
Pull
239
Loosen
IB-1501268-K
Advertisement
Table of Contents
