Table of Contents
Advertisement
Date of
Manual No.
revision
Jun. 2020
IB(NA)1501268-K (Continued from the previous page)
25.1 Adjusting the Absolute Position Detection System
25.1.1 Basic Position Alignment Method I
25.1.2 Basic Position Alignment Method II
25.1.3 Machine End Stopper Method: Automatic Initialization
25.1.4 Machine End Stopper Method: Manual Initialization
25.1.5 Dog-type
25.1.6 Setting the Grid Interval and the Reference Encoder for Grid Interval
26 Setting the Tool Entry Prohibited Range
26.2.10 Precautions
29.2.2.1 Setting the backlash compensation II acceleration rate
29.2.2.2 Setting compensation amount of backlash compensation II
32.2 Deceleration Check Method
32.3 Deceleration Check for Opposite Direction Movement Reversal
32.6 Precautions
38.2 Setting of Expiration Date
38.3 Display of Time Limit Warning and Alarm Notification
39.1 Protect Setting Screen
- The chapter titles were corrected.
3.16 Machine Operation Panel
4.17 Machine Operation Panel
4.20 Exclusive SD Cards
5.3.9 Machine Operation Panel
16 Connection of Machine Operation Panel
20.4 Setting Up without Connecting to the Motor/Drive Units at the Setup of Drive Unit
26.1 Stroke End
26.2 Stored Stroke Limit
- Mistakes were corrected.
Revision details
Advertisement
Table of Contents
