Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
21 Setting Up with HMI Integrated Installer
Install and upgrade "Custom release applications" with HMI integrated installer.
If you do not need the installation, go to the next section.
21.1 Outline of HMI Integrated Installer
"HMI integrated installer" is a function to install and upgrade "Custom release applications" with the data in the memory
card.
The integrated installer has two methods to install and upgrade the applications:
-
Starting an installer (EXE file) which has been prepared to install the applications (This method is called "Installer
start method".)
-
Copying, deleting and setting the registry of the specified file (directory) with the integrated installer to install the
applications (This method is called "File copy method".)
Both methods require the following files in the memory card to install or upgrade the applications.
-
Installation environment for each application (EXE file, a file to copy, etc.)
-
A setting file which collects the information on installation for applications (The setting file is called "setup
application list".)
21.2 Memory Card for Upgrade
The directory configuration of the memory card for the upgrade is as follows.
(A) Directory for custom release applications (The name is fixed to "CustomInstall".)
(B) Setup application list for custom release applications (The name is fixed to "Setuplst.ini".)
(C) Directories in which installation environment is stored for each custom release application (Set any name.)
Files required for the installation are stored in the directories.
IB-1501268-K
Drive name:\
444
(A)
(B)
(C)
Advertisement
Table of Contents
