Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
35 Device Open Parameter Screen
Menu for the device allocation/number of data input
Menu
Line
Copy the data of a line where a cursor is placed.
copy
Writes the contents of the data copied (one line) into a line where the cursor is placed.
If the data of the line is changed after the [Line copy] is pressed, the data before change will be written when
Line
paste
pasting it.
Once the line is copied, it can be pasted many times until new area is copied.
Clears all allocation of the parameter in the device open parameter screen.
All
clear
-Data of the group detail will not be cleared.
When parameter No. is set and [INPUT] key is pressed, the group will be displayed with the parameter No.
Group
set is a top of the group.
search
A cursor moves to the line of the target group.
The group detail screen corresponding to the group where a cursor is placed will be displayed.
Group
When the group where the cursor is placed is not set, it will be invalid.
details
Menu for inputting the display format
Menu
Change the display format to the decimal format with sign.
W/ DEC
When the data type is "WORD (BIT)", it will be changed to "WORD".
sign
Change the display format to the decimal format without sign.
W/O DEC
When the data type is "WORD (BIT)", it will be changed to "WORD".
sign
Change the display format to the HEX format.
HEX
When the data type is "WORD (BIT)", it will be changed to "WORD".
Change the display format to the BIT format.
BIT
The data type is changed to "WORD (BIT)".
Change the display format to the BCD format.
BCD
When the data type is "WORD (BIT)", it will be changed to "WORD".
Enable
Select whether to display the target group infomation on the each group detail screen to users.
display
Select whether the input protection of the data protection key 2 is valid/invalid for setting of the target group
Cancel
information on the each group detail screen to users.
protect
Line
Copy the data of a line where a cursor is placed.
copy
Writes the contents of the data copied (one line) into the line where the cursor is placed.
If the data of the line is changed after [Line copy] is pressed, the data before change will be written when
Line
paste
pasting it.
Once the line is copied, it can be pasted many times until new area is copied.
Clears all allocation of the parameter in the device open parameter screen.
All
(Note) Data of the group detail will not be cleared.
clear
When parameter No. is set and [INPUT] key is pressed, the group will be displayed with the parameter No.
Group
set is a top of the group.
search
A cursor moves to the line of the target group.
The group detail screen corresponding to the group where a cursor is placed will be displayed.
Group
When the group information, where a cursor is placed, is not set, it will be invalid.
details
Details
Details
599
IB-1501268-K
Advertisement
Table of Contents
