Table of Contents
Advertisement
DS-2TD2137-7P Thermal Network Camera User Manual
5. Import certificate to the device.
•
Select Signed certificate is available, and start the installation directly. Click Browse and Install to
import the certificate to the device.
•
Select Create the certificate request first, and continue the installation. Click Browse and Install to
import the certificate to the device.
6. Click Save.
Set QoS
QoS (Quality of Service) can help improve network delay and network congestion by setting the data
sending priority.
NOTE:
QoS needs support from the network device such as router and switch.
Steps
1. Go to Configuration → Network → Advanced Configuration → QoS.
2. Set Video/Audio DSCP, Alarm DSCP, and Management DSCP.
NOTE:
The network can identify the priority of data transmission. The bigger the DSCP value,
the higher the priority. Set the same value in the router while configuring.
3. Click Save.
Set IEEE 802.1x
You can authenticate user permission of the connected device by setting IEEE 802.1x.
Go to Configuration → Network → Advanced Settings → 802.1x, and enable the function.
NOTE:
Select protocol and version according to router information. User name and password
of server are required.
User and Account
Set User Account and Permission
The administrator can add, modify, or delete other accounts, and grant different permission to different
user levels.
CAUTION:
To increase security of using the device on the network, change the password of
your account regularly. Changing the password every three months is recommended.
If the device is used in a high-risk environment, it is recommended that the
password be changed every month or week.
Steps
1. Go to Configuration → System → User Management → User Management.
UM DS-2TD2137-7P 042021NA
68
Advertisement
Table of Contents
