Automatic Thermography; Set Thermography Parameters - HIKVISION DS-2TD2137-7P User Manual

DS-2TD2137-7P Thermal Network Camera User Manual

Automatic Thermography

Configure the temperature measurement parameters and temperature measurement rules.The device can
measure the actual temperature and output alarms when temperature exceeds the alarm threshold value.

Set Thermography Parameters

Configure the temperature measurement parameters.
Before You Start
Go to Configuration → System → Maintenance → VCA Resource Type, select Temperature
Measurement+Behavior Analysis.
Steps
1. Go to Configuration → Local, enable Display Temperature Info.
•
Display Temperature Info.: Select Yes to display temperature information on live view.
•
Enable Rules to display the rules information on live view.
2. Click Save.
3. Go to Configuration → Temperature Measurement → Basic Settings to configure parameters.
•
Enable Temperature Measurement: Check to enable the temperature measurement function.
•
Enable Color-Temperature: Check to display Temperature-Color Ruler in live view.
•
Display Temperature Info.on Stream: Check to display temperature information on the stream.
•
Display Temperature in Optical Channel: Check to display thermal channel temperature information
in the optical channel.
•
Display Max./Min./Average Temperature: Check to display maximum/minimum/average
temperature information on liveview when the temperature measurement rule is line or area.
•
Position of Thermometry Info: Set the position of the temperature information shown on live view.
­
Near Target: Display the information beside the temperature measurement rule.
­
Top Left: Display the information on the top left of screen.
•
Add Original Data on Capture: Check to add data on alarm triggered capture of thermal channel.
•
Add Original Data on Stream: Check to add original data on thermal view.
•
Data Refresh Interval: Refresh interval of temperature information.
•
Unit: Display temperature with degrees Celsius (° C)/degrees Fahrenheit (° F)/degrees Kelvin (K).
• Temperature Range: Select the temperature measurement range.
UM DS-2TD2137-7P 042021NA 14