DS-2TD2137-7P Thermal Network Camera User Manual
Scene Mode
There are several sets of image parameters predefined for different installation environments. Select a
scene according to the actual installation environment to speed up the display settings.
OSD
You can customize OSD (On-screen Display) information such as device name, time/date, font, color, and
text overlay displayed on video stream.
Go to OSD setting page: Configuration → Image → OSD Settings. Set the corresponding parameters, and click
Save to take effect.
Displayed Information: Set camera name, date, week, and their related display format.
•
•
Text Overlay: Set customized overlay text on image.
OSD Parameters: Set OSD parameters, such as Display Mode, OSD Size, and Font Color.
•
Set Privacy Mask
The function blocks certain areas in the live view to protect privacy. No matter how the device moves, the
blocked areas will never be seen.
Steps
1. Go to privacy mask setting page: Configuration → Image → Privacy Mask.
2. Check Enable Privacy Mask.
3. Click Draw Area. Drag the mouse in the live view to draw a closed area.
•
Drag the corners of the area: Adjust the size of the area.
•
Drag the area: Adjust the position of the area.
•
Click Clear All: Clear all the areas you set.
4. Click Stop Drawing.
5. Click Save.
NOTE:
Up to four areas are supported for setting.
Overlay Picture
Overlay a customized picture on live view.
Before You Start
The picture to overlay has to be in 24-bit BMP format, and the maximum picture size is 128 × 128 pixels.
UM DS-2TD2137-7P 042021NA
46