Table of Contents
Advertisement
8. Click Save.
10.12.4 Set QoS
QoS (Quality of Service) can help improve the network delay and network congestion by setting
the priority of data sending.
Note
QoS needs support from network device such as router and switch.
Steps
1. Go to Configuration → Network → Network Settings → QoS .
2. Set Video/Audio DSCP, Event/Alarm DSCP and Management DSCP.
Note
Network can identify the priority of data transmission. The bigger the DSCP value is, the higher
the priority is. You need to set the same value in router while configuration.
3. Click Save.
10.12.5 Set IEEE 802.1X
You can authenticate user permission of the connected device by setting IEEE 802.1X.
Go to Configuration → Network → Network Settings → 802.1X , and enable the function.
Select protocol and version according to router information. User name and password of server are
required.
Note
If you set the Protocol to EAP-TLS, select the Client Certificate and CA Certificate.
●
If the function is abnormal, check if the selected certificate is abnormal in Certificate
●
Management.
10.12.6 Certificate Management
It helps to manage the server/client certificates and CA certificate, and to send an alarm if the
certificates are close to expiry date, or are expired/abnormal.
Network Speed Dome User Manual
89
Advertisement
Table of Contents
