Table of Contents
Advertisement
DS-2TD2137-7P Thermal Network Camera User Manual
DDE
Digital Detail Enhancement adjusts the image details. OFF and Normal modes are selectable.
OFF: Disable this function.
•
•
Normal: Set the DDE level to control the image details. The higher the level, the more details show, but
the higher the noise.
Brightness Sudden Change
When the target and the background brightness hugely differ (the temperature difference of target and
background is huge), the system reduces the difference for enhanced viewing.
Enhance Regional Image
You can select the desired image area to improve the coding quality. The regional image will be more
detailed and clear.
Steps
1. Go to Configuration → Image → Display Settings → Image Enhancement.
2. Select the area of regional image enhancement. You can select OFF to disable this function, or select
Custom Area to draw a desired area.
NOTE:
A red rectangle shows on the display, in which the image quality is improved.
Mirror
When the live view image is the reverse of the actual scene, this function displays the image normally.
NOTE:
Select the mirror mode as needed.
The video recording will be shortly interrupted when the function is enabled.
Video Standard
Video standard is an ability of a video card or video display device that defines the amount of colors that
are shown and the resolution.The two most common video standard are NTSC and PAL. In NTSC, 30 frames
are transmitted each second. Each frame is made up of 525 individual scan lines. In PAL, 25 frames are
transmitted each second. Each frame is made up of 625 individual scan lines. Select video signal standard
according to the video system in your country.
Digital Zoom
You can zoom in the image
The larger the zoom size, the more blurred the image.
UM DS-2TD2137-7P 042021NA
45
Advertisement
Table of Contents
