Table of Contents
Advertisement
DS-2TD2137-7P Thermal Network Camera User Manual
Set Transmission Parameters
The live view image may display abnormally according to the network conditions. In different network
environments, adjust the transmission parameters to solve the problem.
Steps
1. Go to Configuration → Local.
2. Set the transmission parameters as required.
•
Protocol TCP: TCP ensures complete delivery of streaming data and better video quality, yet real-
time transmission will be affected. It is suitable for a stable network environment.
•
UDP: UDP is suitable for an unstable network environment that does not demand high video fluency.
•
MULTICAST: This is suitable for situations with multiple clients. Set the multicast address for them
before selection.
NOTE:
For detailed multicast information, refer to Multicast.
•
HTTP: HTTP is suitable when a third-party needs to get the device stream.
•
Play Performance
Shortest Delay: The device takes the real-time video image as priority over video fluency.
Balanced: The device ensures both the real-time video image and the fluency.
Fluent: The device takes video fluency as the priority over real-time. In a poor network
environment, the device cannot ensure video fluency even if fluency is enabled.
Custom: You can set the frame rate manually. In a poor network environment, you can reduce the
frame rate to get a fluent live view, but the rule information may not display.
3. Click OK.
UM DS-2TD2137-7P 042021NA
38
Advertisement
Table of Contents
