Login; Install Plug-In; Illegal Login Lock - HIKVISION DS-2TD2137-7P User Manual

DS-2TD2137-7P Thermal Network Camera User Manual
3. Input 192.168.1.64 in the browser.
4. Set device activation password.
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong
password of your own choosing (using a minimum of eight characters, including at least
three of the following categories: upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product. We also recommend
that you reset your password regularly. Especially in high security systems, resetting the
password monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
5. Click OK.
6. Input the activation password to log in to the device.
7. Optional: Go to Configuration → Network → Basic → TCP/IP to change the IP address of the device to the
same segment of your network.

Login

Log in to the device via a Web browser.

Install Plug-in

You can access the device by installing a plug-in.
Steps
1. Input IP address of the device in a Web browser, and the login window will pop up.
2. Install the plug-in according to the prompt.
3. Open the Web browser again, and input IP address of the device.
4. Input user name and password, and click Login.
•
Help: Get online help document of the device.
• Logout : You can exit safely.

Illegal Login Lock

This feature helps to improve the security when accessing the device via the Internet.
The admin user can set the login attempts with a wrong password. When your login attempts with the
wrong password reach the set number of times, the device locks.
Go to Configuration → System → Security → Security Service, enable Enable Illegal Login Lock, and set the
illegal login attempts.
UM DS-2TD2137-7P 042021NA 12