DS-2TD2137-7P Thermal Network Camera User Manual
Chapter 7 Arming Schedule and Alarm Linkage
Arming schedule is a customized time period during which the device performs certain tasks. Alarm
linkage is the response to the detected incident or target during the scheduled time.
Set Arming Schedule
Set the valid time of the device tasks.
Steps
1. Click Arming Schedule.
2. Drag the time bar to draw desired valid time.
NOTE:
Up to eight periods can be configured for one day.
3. Adjust the time period.
•
Click on the selected time period, and enter the desired value. Click Save.
•
Click on the selected time period. Drag the both ends to adjust the time period.
•
Click on the selected time period, and drag it on the time bar.
4. Optional: Click Copy to...to copy the same settings to other days.
5. Click Save.
Linkage Method Settings
You can enable the linkage functions when an event or alarm occurs.
Trigger Alarm Output
If the device is connected to an alarm output device, and the alarm output no. has been configured, the
device sends alarm information to the connected alarm output device when an alarm triggers.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Output.
2. Set alarm output parameters.
•
Automatic Alarm: For information about the configuration, see
•
Manual Alarm: For information about the configuration, see
3. Click Save.
UM DS-2TD2137-7P 042021NA
Automatic Alarm
.
Manual Alarm
.
32