Set Video Tampering Alarm - HIKVISION DS-2TD2137-7P User Manual

DS-2TD2137-7P Thermal Network Camera User Manual
•
Stop Drawing: Finish drawing one area.
•
Clear All: Delete all the areas.
4. Optional: Repeat the above steps to set multiple areas.

Set Video Tampering Alarm

When the configured area is covered and cannot be monitored normally, the alarm is triggered and the
device takes certain alarm response actions.
Steps
1. Go to Configuration → Event → Basic Event → Video Tampering.
2. Check Enable.
3. Set the Sensitivity. The higher the value, the easier to detect the area covering.
4. Click Draw Area and drag the mouse in the live view to draw the area.
•
Stop Drawing: Finish drawing.
•
Clear All: Delete all the drawn areas.
UM DS-2TD2137-7P 042021NA
Figure 4, Set Rules
28