Set Https - HIKVISION DS-2TD2137-7P User Manual

DS-2TD2137-7P Thermal Network Camera User Manual
2. Check Enable SSH.
3. Click Save.

Set HTTPS

HTTPS is a network protocol that enables encrypted transmission and identity authentication, which
improves remote access security.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS.
2. Check Enable.
3. Click Delete to recreate and install certificate.
•
Create and install self-signed certificate: Refer to
•
Create certificate request and install certificate
4. Click Save.
Create and Install Self-Signed Certificate
Refer to Install CA Certificate
Steps
1. Check Create Self-Signed Certificate.
2. Click Create.
3. Follow the prompt to enter Country, Hostname/IP, Validity, and other parameters.
4. Click OK.
Result
The device will install the self-signed certificate by default.
Install CA Certificate
If the demand for external access security is high, create and install authorized certificate via HTTPS
protocol to ensure data transmission security.
Steps
1. Select Create certificate request first, and continue the installation.
2. Click Create.
3. Follow the prompt to input Country, Hostname/IP, Validity, and other parameters.
4. Click Download to download the certificate request and submit it to the trusted certificate authority for
signature.
UM DS-2TD2137-7P 042021NA
Create and Install Self-signed
Certificate
67