Set Ftp; Set Cloud Storage - HIKVISION DS-2TD2137-7P User Manual

DS-2TD2137-7P Thermal Network Camera User Manual

Set FTP

You can configure the FTP server to save images that are captured by events or a timed snapshot task.
Before You Start
Get the FTP server address first.
Steps
1. Go to Configuration → Network → Advanced Settings → FTP.
2. Configure FTP settings.
•
Server Address and Port: The FTP server address and corresponding port.
•
User Name and Password: The FTP user should have the permission to upload pictures.
NOTE: If the FTP server supports picture uploading by anonymous users, you can check
Anonymous to hide your device information during uploading.
• Directory Structure: The saving path of snapshots in the FTP server.
3. Click Upload Picture to enable uploading snapshots to the FTP server.
4. Click Test to verify the FTP server.
5. Click Save.

Set Cloud Storage

It helps to upload the captured pictures and data to the cloud. The platform requests pictures directly
from the cloud for pictures and analysis.This function is supported only by certain models.
Steps
CAUTION: If cloud storage is enabled, the pictures are stored in the cloud storage server
preferentially.
1. Go to Configuration → Storage → Storage Management → Cloud Storage.
2. Check Enable Cloud Storage.
3. Set basic parameters.
•
Protocol Version: The protocol version of the cloud storage server.
•
Server IP: The IP address of the cloud storage server. It supports IPv4 address.
•
Server Port: The cloud storage server port. 6001 is the default port and it is recommended not to
edit it.
•
User Name and Password: The user name and password of the cloud storage server.
UM DS-2TD2137-7P 042021NA 49