Table of Contents
Advertisement
DS-2TD2137-7P Thermal Network Camera User Manual
Set ROI
ROI (Region of Interest) encoding assigns more encoding resource to the region of interest to increase the
quality of the ROI, whereas the background information is less focused.
Before You Start
Check the video coding type. ROI is supported when the video coding type is H.264 or H.265.
Steps
1. Go to Configuration → Video/Audio → ROI.
2. Check Enable.
3. Select Stream Type.
4. Select Region No.in Fixed Region to draw ROI region.
1) Click Drawing.
2) Click and drag the mouse on the view screen to draw the fixed region.
3) Click Stop Drawing.
NOTE:
Select the fixed region that needs to be adjusted, and drag the mouse to adjust its
position.
5. Input the Region Name and ROI Level.
6. Click Save.
NOTE:
The higher the ROI level, the clearer the image of the detected region.
7. Optional: Select other region No.and repeat the above steps if you need to draw multiple fixed regions.
Display Settings
This offers parameter settings to adjust image features. Go to Configuration → Image → Display Settings.
Click Default to restore settings.
Image Adjustment (Thermal Channel)
You can optimize the image display effect of thermal channel by setting background correction and
manual correction.
Background Correction
Fully cover the front of the lens with an object of uniform temperature such as foam board or paperboard.
Click Correct, and the device will take the uniform object as the standard and optimize the image once.
Manual Correction
Click Correct to optimize the image once.
UM DS-2TD2137-7P 042021NA
42
Advertisement
Table of Contents
