DS-2TD2137-7P Thermal Network Camera User Manual
Trigger Recording
Check Trigger Recording, and the device records the video about the detected alarm event. For recording
settings, refer to Video Recording and Picture Capture
Set Audible Alarm Output
For devices that support audible warning as a linkage method, options are open to configure audible alarm
parameters.
Steps
NOTE:
The function is supported only by certain camera models.
1. Go to the setting page: Configuration → Event → Basic Event → Audible Alarm Output.
2. Select desired alarm sound type and alarm times.
3. Set arming schedule for audible alarm. Refer to Set Arming Schedule
4. Click Save.
Set Flashing Alarm Light Output
Steps
1. Go to Configuration → Event → Basic Event → Flashing Alarm Light Output.
2. Set Flashing Duration, Flashing Frequency, and Brightness.
•
Flashing Duration: The time period the flashing lasts when one alarm happens.
•
Flashing Frequency: The flashing speed of the light. High, Medium, and Low are selectable.
•
Brightness: The brightness of the light.
3. Edit the arming schedule.
4. Click Save.
NOTE:
Only certain camera models support the function.
UM DS-2TD2137-7P 042021NA
35