DS-2TD2137-7P Thermal Network Camera User Manual
Export Diagnose Information
Diagnose information includes running log, system information, and hardware information.
Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Diagnose Information to
export diagnose information of the device.
Reboot
You can reboot the device via a browser.
Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Reboot.
Restore and Default
Restore and Default helps restore the device parameters to the default settings.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance.
2. Click Restore or Default according to your needs.
•
Restore: Reset device parameters, except user information, IP parameters, and video format to the
default settings.
•
Default: Reset all the parameters to the factory default.
NOTE:
Be careful when using this function. After resetting to the factory default, all the
parameters are reset to the default settings.
Upgrade
Before You Start
You need to obtain the correct upgrade package.
CAUTION: DO NOT disconnect power during the process, and the device reboots automatically
after upgrade.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance.
2. Choose one method to upgrade.
•
Firmware: Locate the exact path of the upgrade file.
•
Firmware Directory: Locate the directory which the upgrade file belongs to.
3. Click Browse to select the upgrade file.
4. Click Upgrade.
UM DS-2TD2137-7P 042021NA
62