DS-2TD2137-7P Thermal Network Camera User Manual
Single Alarm: The system sends alarm only once for one target triggering. Otherwise, the alarm will
•
trigger continuously until the target disappears.
Scene Modes: The scene mode is set to be General by default. Select Distant View when you are far
•
from the targets. Select Indoor when you are indoor.
Restore Parameters
•
Restore Default: Click Restore to restore the parameters to the default.
Restart VCA: Click Restart to restart the VCA function.
•
Set Global Size Filter
Targets larger or smaller than the set size range are filtered out. The settings is valid for all behavior
analysis rules.
Steps
1. Go to Configuration → Behavior Analysis → Advanced Configuration to enable the function.
2. Click
to draw a maximum size frame on live image.
3. Click
to draw a minimum size frame on live image.
4. Click Save.
UM DS-2TD2137-7P 042021NA
25