Table of Contents
Advertisement
DS-2TD2137-7P Thermal Network Camera User Manual
•
Picture Storage Pool ID: The ID of the picture storage region in the cloud storage server. Make sure
the storage pool ID and the storage region ID are the same.
4. Click Test to test the configured settings.
5. Click Save.
Video Recording
This section introduces manual and scheduled recording, playback, and downloading recorded files.
Record Automatically
This function can record video automatically during configured time periods.
Before You Start
Select Trigger Recording in event settings for each record type except Continuous. See Event and Alarm for
details.
Steps
1. Go to Configuration → Storage → Schedule Settings → Record Schedule.
2. Check Enable.
3. Select a record type.
NOTE:
The record type varies by model.
•
Continuous: The video will record continuously according to the schedule.
•
Motion: When motion detection is enabled and trigger recording is selected as the linkage method,
object movement is recorded.
•
Alarm: When alarm input is enabled and trigger recording is selected as the linkage method, the
video is recorded after receiving an alarm signal from an external alarm input device.
•
Motion | Alarm: Video is recorded when motion is detected or an alarm signal is received from the
external alarm input device.
•
Motion & Alarm: Video is recorded only when motion is detected and an alarm signal is received from
the external alarm input device.
•
Event: The video is recorded when a configured event is detected.
4. Set schedule for the selected record type. Refer to Set Arming Schedule for the setting operation.
5. Click Advanced to set the advanced settings.
•
Overwrite: Enable Overwrite to overwrite the video records when the storage space is full. Otherwise
the camera cannot record new videos.
•
Pre-record: The time period you set to record before the scheduled time.
UM DS-2TD2137-7P 042021NA
50
Advertisement
Table of Contents
