Table of Contents
Advertisement
DS-2TD2137-7P Thermal Network Camera User Manual
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Indicates a hazardous situation which, if not avoided, will or could result in death or
DANGER
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in
CAUTION
equipment damage, data loss, performance degradation, or unexpected results.
Provides additional information to emphasize or supplement important points of the main
NOTE:
text.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or
property loss.
Laws and Regulations
•
Use of the product must be in strict compliance with the local electrical safety regulations.
Transportation
•
Keep the device in original or similar packaging while transporting it.
•
Keep all packaging after unpacking them for future use. In case any failure occurs, you need to return
the device to the factory in the original packaging. Transportation without the original packaging may
result in damage to the device, and the company shall not take any responsibilities.
•
Do not drop the product or subject it to physical shock. Keep device away from magnetic interference.
Power Supply
•
Please purchase the charger yourself. Input voltage should meet the Limited Power Source (12 VDC, 24
VAC or PoE (802.3af)) according to the IEC61010-1 standard. Refer to technical specifications for
detailed information.
•
Make sure the plug is properly connected to the power socket.
•
DO NOT connect multiple devices to one power adapter, to avoid overheating or fire hazards caused by
overload.
Battery
•
Improper use or replacement of the battery may result in explosion hazard. Replace with the same or
equivalent type only. Dispose of used batteries in conformance with the instructions provided by the
battery manufacturer.
•
The built-in battery cannot be dismantled. Contact the manufacture for repair if necessary.
•
For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery
quality. Otherwise, damage may occur.
UM DS-2TD2137-7P 042021NA
3
Advertisement
Table of Contents
