Access Camera Via Hik-Connect; Set Isup - HIKVISION DS-2TD2137-7P User Manual

DS-2TD2137-7P Thermal Network Camera User Manual
Steps
1. Run SADP software.
2. Select a camera, and enter the Modify Network Parameters page.
3. Check Enable Hik-Connect.
4. Create a verification code or change the old verification code.
NOTE: The verification code is required when you add the camera to Hik-Connect service.
5. Click and read "Terms of Service" and "Privacy Policy."
6. Confirm the settings.

Access Camera via Hik-Connect

Use the Hik-Connect mobile device application to view live images, receive alarm notifications, etc.
Steps
1. Download and install the Hik-Connect app by searching for "Hik-Connect" in the Apple App Store or on
the Hikvision Website (www.hikvision.com).
2. Launch the app and register for a Hik-Connect user account.
3. Log in after registration.
4. In the app, tap "+" on the upper-right corner, and then scan the QR code of the camera to add the
camera. The QR code is on the camera or on the camera's Quick Start Guide cover in the package.
5. Follow the prompts to set the network connection, and add the camera to your Hik-Connect account.
NOTE:
For detailed information, refer to the Hik-Connect app user manual.

Set ISUP

When the device is registered on an ISUP platform (formerly called Ehome), you can visit and manage the
device, transmit data, and forward alarm information over a public network.
Steps
1. Go to Configuration → Network → Advanced Settings → Platform Access.
2. Select ISUP as the platform access mode.
3. Select Enable.
4. Select a protocol version and input related parameters.
5. Click Save. Register status turns to Online when the function is correctly set.
UM DS-2TD2137-7P 042021NA 59