Table of Contents
Advertisement
Thermal Optical Bi-spectrum Network Camera User Manual
10.14.6 Control Timeout Settings
If this function is enabled, you will be logged out when you make no operation (not including
viewing live image) to the device via web browser within the set timeout period.
Go to Configuration → System → Security → Advanced Security to complete settings.
10.14.7 Set SSH
SSH is a protocol to ensure security of remote login. This setting is reserved for professional
maintenance personnel only.
Steps
1. Go to Configuration → System → Security → Security Service .
2. Check Enable SSH.
3. Click Save.
10.14.8 Set HTTPS
HTTPS is a network protocol that enables encrypted transmission and identity authentication,
which improves the security of remote access.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS .
2. Check Enable.
3. Optional: Check HTTPS Browsing to access the device only via HTTPS protocol.
4. Select a server certificate.
Note
Complete certificate management before selecting server certificate. Refer to Certificate
●
Management for detailed information.
If the function is abnormal, check if the selected certificate is abnormal in Certificate
●
Management.
5. Click Save.
10.14.9 Set QoS
QoS (Quality of Service) can help improve the network delay and network congestion by setting
the priority of data sending.
Note
QoS needs support from network device such as router and switch.
79
Advertisement
Table of Contents
