Set Ip Address Filter; Set Mac Address Filter - HIKVISION DS-2XC6285G0-L User Manual

9.4.1 Set IP Address Filter

IP address filter is a tool for access control. You can enable the IP address filter to allow or forbid
the visits from the certain IP addresses.
IP address refers to IPv4.
Steps
1. Go to Maintenance and Security → Security → IP Address Filter .
2. Check Enable.
3. Select the type of IP address filter.
Blocklist IP addresses in the list cannot access the device.
Allowlist Only IP addresses in the list can access the device.
4. Edit the IP address filter list.
Add Add a new IP address or IP address range to the list.
Modify the selected IP address or IP address range in the list.
Delete the selected IP address or IP address range in the list.
5. Click Save.

9.4.2 Set MAC Address Filter

MAC address filter is a tool for access control. You can enable the MAC address filter to allow or
forbid the visits from the certain MAC addresses.
Steps
1. Go to Maintenance and Security → Security → MAC Address Filter .
2. Check Enable.
3. Select the type of MAC address filter.
Blocklist MAC addresses in the list cannot access the device.
Allowlist Only MAC addresses in the list can access the device.
4. Edit the MAC address filter list.
Add Add a new MAC address to the list.
Modify the selected MAC address in the list.
Delete the selected MAC address in the list.
5. Click Save.
Network Camera User Manual
69