Draw Area; Set Size Filter - HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM User Manual

Network Camera User Manual
5. Optional: Repeat the above steps to set more regions.
6. For the arming schedule settings, see
Linkage Method Settings
Click Save.
7.
NOTE: The function is supported only by certain models. The actual display varies by model.

6.2.12 Draw Area

This section introduces the configuration of area.
Steps
1. Click Draw Area.
2. Click on the live view to draw the boundaries of the detection region, and right click to complete the
drawing.
3. Click Save.
NOTE: Click Clear All to clear all pre-defined areas.

6.2.13 Set Size Filter

This section introduces the setting of size filter. Only a target whose size is between the minimum value
and maximum value is detected and triggers the alarm.
Steps
1. Click Max. Size, and drag the mouse in the live view to draw the maximum target size.
2. Click Min. Size, and drag the mouse in the live view to draw the minimum target size.
3. Click Save.
UM Network Camera User Manual 071421NA
Figure 9, Set Rule
Set Arming Schedule
.
. For the linkage method settings, see
55