Checking The Frame; Checking The Link Fork; Checking The Throttle Cable Routing - GAS GAS EC 250 2021 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.36
12.37
12.38
78

Checking the frame

401347-01

Checking the link fork

401341-01

Checking the throttle cable routing

S04453-01
–
Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deformation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
–
Check the link fork for damage, cracks, and deformation.
» If the link fork shows signs of damage, cracks, or deformation:
–
Change the link fork.
Guideline
Repairs on the link fork are not permitted.
Preparatory work
–
Remove the seat. ( p. 64)
–
Remove the fuel tank. (
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed, side by side, on the back of
the handlebars, above the fuel tank bracket on the right of the
frame to the throttle valve body. Both throttle cables must be
secured behind the rubber strap of the fuel tank support.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
Finishing work
–
Install the fuel tank. ( p. 71)
–
Mount the seat. ( p. 65)
p. 70)