11 SERVICE WORK ON THE CHASSIS
11.38
11.39
11.40
68
Checking the frame
Checking the link fork
Checking the throttle cable routing
Warning
Danger of accidents The throttle cable can become kinked, trapped or blocked if it is not routed correctly.
If the throttle cable is kinked, trapped or blocked, the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specification.
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Screw, chain
guide on link
fork at the rear
Screw, chain
guide on link
V01712-01
fork at the
front
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
»
If the frame shows signs of damage, cracks, or deformation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
S02306-01
–
Check the link fork for damage, cracks, and deformation.
»
If the link fork shows signs of damage, cracks, or deformation:
–
Change the link fork.
Guideline
Repairs on the link fork are not permitted.
S02305-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
M6x19
10 Nm (7.4 lbf ft)
M6x45
10 Nm (7.4 lbf ft)
p. 43)
p. 54)
(
p. 60)
Loctite
®
243™