Checking Spoke Tension - GAS GAS EC 250 2021 Owner's Manual

14 WHEELS, TIRES
14.7
98

Checking spoke tension

Warning
Danger of accidents Incorrectly tensioned spokes impair the handling characteristic and result in secondary dam-
age.
The spokes break due to being overloaded if they are too tightly tensioned. If the tension in the spokes is too low,
then lateral and radial run-out will form in the wheel. Other spokes will become looser as a result.
–
Check spoke tension regularly, and in particular on a new vehicle. (Your authorized GASGAS Motorcycles work-
shop will be glad to help.)
–
Strike each spoke briefly using a screwdriver blade.
Info
The frequency of the sound depends on the spoke length
and spoke diameter.
If you hear different tone frequencies from different spokes
of equal length and diameter, this is an indication of differ-
ent spoke tensions.
You should hear a high note.
400694-01
» If the spoke tension differs:
–
Correct the spoke tension.
–
Check the spoke torque.
Guideline
Spoke nipple, front
wheel
Spoke nipple, rear
wheel
Torque wrench kit (58429094000)
M4.5 6 Nm (4.4 lbf ft)
M4.5 6 Nm (4.4 lbf ft)