11.38
Checking the frame
11.39
Checking the link fork
11.40
Checking the throttle cable routing
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
A00792-10
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
»
If the frame shows signs of damage, cracks, or deformation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
S02306-01
–
Check the link fork for damage, cracks, and deformation.
»
If the link fork shows signs of damage, cracks, or deformation:
–
Change the link fork.
S02305-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
SERVICE WORK ON THE CHASSIS 11
M6
Info
Always replace a damaged link fork. GASGAS Motor-
cycles does not permit repairing link forks.
p. 56)
(
p. 62)
10 Nm (7.4 lbf ft)
p. 44)
71